Brackets
Zinc-plated steel beacon mounting brackets — DIN stud, flange, L, Z and extension pole types, rubber capped.
Brackets are the part that fails first and gets blamed last. A beacon that shakes loose is usually a mounting problem, not a lamp problem — thin steel, a single fixing point, or a thread that strips after the third re-fit.
This range covers DIN-pattern beacon brackets in zinc-plated steel with a rubber-protected cap, straight and 90-degree bent-tube bodies, and extension poles from short offsets up to 500mm with a base plate. The M24 threaded stud matches the DIN mounting used by most European beacons, so a bracket and a lamp from different suppliers usually mate correctly.
If you are mounting on a curved surface or a plastic body panel, tell us the panel thickness and we will recommend a bracket with a wider base rather than let you shim it.
