Tail Light
Combination LED tail light bars and kits — multi-chamber stop / turn / tail / reverse, bracket or surface mount.
A combination tail light is a system, not a lamp: stop, turn, tail and often reverse and licence-plate illumination in one housing, with a bracket that has to survive the same vibration as the chassis. This range covers the square and oval combination bodies used on flatbeds and curtain-siders, plus the sequential and dynamic models now specified on new European trailers.
Where a model is described as sealed, the housing is assembled with a continuous gasket and the cable exit is potted, so pressure washing does not push water into the reflector. That is the difference between a lamp that lasts five years on a tipper and one that fogs in the first winter.
Brackets, grommets and pigtails are listed with the lamps where they are specific to the model. If you are replacing an existing unit, send the OE reference or the mounting hole spacing and we will confirm which body drops straight in.
